LB9199 Place Holder Module

Teknik Veriler

Rated voltage

U r Use only in connection with the power supplies LB9***

Voltage

EN 61010-1 (Safety requirement: < 60 V, external supply SELV/PELV)

Ambient temperature

-40 ... 60 °C (-40 ... 140 °F)

Storage temperature

-40 ... 85 °C (-40 ... 185 °F)

Relative humidity

95 % non-condensing

Shock resistance

shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18

Vibration resistance

frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance

Damaging gas

designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3

Degree of protection

IP20 when mounted on backplane

Connection

removable front connector with screw flange (accessory) wiring connection via spring terminals (0.14 ... 1.5 mm 2 ) or screw terminals (0.08 ... 1.5 mm 2 )

Mass

approx. 65 g

Height

100 mm

Width

16 mm

Depth

102 mm

UL approval

E106378

Control drawing

116-0321

Approved for

cUL (Canada): CL I Zn. 2 IIC; IS circuits for CL I Zn. 0 IIC ULus (USA): CL I Div. 2 Grp. A, B, C, D; IS circuits for CL I, II, III Div. 1 Grp. A, B, C, D, E, F, G

Bureau Veritas Marine

22449/B0 BV

System information

The module has to be mounted in appropriate backplanes (LB9***) in Zone 2 or outside hazardous areas. Here, observe the corresponding declaration of conformity. For use in hazardous areas (e. g. Zone 2, Zone 22 or Div. 2) the module must be installed in an appropriate enclosure.

Supplementary information

EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.