KCD2-UT2-1 Universal Temperature Converter

Teknik Veriler

Signal type

Analog input

Safety Integrity Level (SIL)

SIL 2

Connection

terminals 9+, 10- or power feed module/Power Rail

Rated voltage

U r 19 ... 30 V DC

Ripple

within the supply tolerance

Power dissipation

≤ 0.98 W

Power consumption

max. 0.98 W

Programming interface

programming socket

Connection side

field side

RTD

type Pt10, Pt50, Pt100, Pt500, Pt1000 (EN 60751: 1995) type Pt10GOST, Pt50GOST, Pt100GOST, Pt500GOST, Pt1000GOST (6651-94) type Cu10, Cu50, Cu100 (P50353-92) type Ni100 (DIN 43760)

Measuring current

approx. 200 µA with RTD

Types of measuring

2-, 3-, 4-wire connection

Lead resistance

max. 50 Ω per line

Measurement loop monitoring

sensor breakage, sensor short-circuit

Thermocouples

type B, E, J, K, N, R, S, T (IEC 584-1: 1995) type L (DIN 43710: 1985) type TXK, TXKH, TXA (P8.585-2001)

Cold junction compensation

external and internal

Potentiometer

0 ... 20 kΩ (2-wire connection), 0.8 ... 20 kΩ (3-wire connection)

Voltage

selectable within the range -100 ... 100 mV

Input resistance

≥ 1 MΩ (-100 ... 100 mV)

Çıkış

Analog current output

Current range

0 ... 20 mA or 4 ... 20 mA

Fault signal

downscale 0 or 2 mA, upscale 21.5 mA (acc. NAMUR NE43)

Source

load 0 ... 550 Ω open-circuit voltage ≤ 18 V

Sink

Voltage across terminals 5 ... 30 V. If the current is supplied from a source > 16.5 V, series resistance of ≥ (V - 16.5)/0.0215 Ω is needed, where V is the source voltage. The maximum value of the resistance is (V - 5)/0.0215 Ω.